Services >>  Xerox Copiers and Printers >>  Copiers >>  Black and White over 30 ppm

CopyCentre C90™

When you need a fast, reliable copier, this is the one.

Learn more about
CopyCentre C90™

Features

  • 90 pages per minute
  • 100 sheet automatic document feeder
  • 600 x 600 dpi x 8 bit resolution
  • Reduction enlargement 25-400%
  • Unlimited double-sided copying
  • Unlimited sets with offset catch tray or office finisher option
  • 4 – 500 sheet paper trays are standard
  • 5,100 sheet hi-capacity paper feeder is standard

Technical Specifications

Speed
35 ppm color, black and white
8.5 x 11", A4 LEF
Resolution
Copy: 600 x 600 dpi plus Photo Mode
Print: 600 x 600 x 8 dpi Contone
Scan: 4 resolution selections - 600 x 600, 400 x 400, 300 x 300, or 200 x 200 dpi
Print Controller
Electronics for Imaging (EFI)
850 MHz (min) Intel Pentium lll
256 MB printing memory
20GB hard disk drive
Genuine PostScript Level 3
10/100 BaseT - standard
Base Configuration
Print engine with EFI controller
Scanner with stand
Duplexing Automatic Document Feeder (DADF)
Trayless duplex
Electronic pre-collation
Bypass tray
Choice of a 3-tray module (system max = 2175 sheets) or a high capacity paper tray module (system max = 3215 sheets)
Reduction/enlargement 25 to 400%
Copying Features
Multiple-up and Repeat Image
Cover and Poster Mode
Mirror Image / Negative Image
Auto & Variable Repeat
Book Mode/Split Scan
Booklet Creation
Build Job
Store Job
Program Ahead
Scanning
UI-initiated scanning
Fiery Scan Twain plug-in
Scan to personal mailboxes
Scan formats: TIFF, JPEG, PDF
Productivity and Document Management
RIP while print
Continuous print - no cycle down
Forward / reverse order printing
Auto duplexing
Fiery Scan & Scan to personal mailboxes
Electronic collation
Paper Tray Capacity
Tray 1: 520 sheets - sizes 5.5 x 8.5" - 11 x 17", A5 - A3
Bypass Tray: 95 sheets - sizes 5.5 x 8.5" - 12 x 19", A5 - SRA3
Three Tray Option: Total Capacity = 2175 (includes Tray 1 and Bypass)
Tray 2-4: 520 sheets each - sizes 5.5 x 8.5" - 11 x 17", A5 - A3
High Capacity Tray Option:Total Capacity = 3215 (includes Tray 1 and Bypass)
Tray 2: 520 sheets - sizes 5.5 x 8.5" - 11 x 17", A5 - A3
Tray 3 & 4: 2080 sheets - sizes 8.5 x 11", B5, A4
Maximum Sheet Size
Bypass Tray 5: 12 x 19", 305mm x 483mm or SRA3 (320mm x 450mm)
Maximum Image Sizes
11.89 x 18.7", 302mm x 476.6mm
Supported Paper Weights
All trays 18 lb. bond to 110 lb. index (64gsm to 220gsm)
Speed by Media
Plain paper: 35 ppm color, 35 ppm black and white
Transparency; 8 ppm color, 16 ppm black and white
Heavyweight 1 (28 lb. - 90lb. index, 99gsm -169gsm): 22 ppm black and white
Heavyweight 2 (65 lb. cover -110lb. index, 170gsm -220gsm): 11 ppm color 11 ppm black and white
Warm-up Time
Sleep Mode: 180 sec.
Low Power Mode: < 30 sec
First-Print-Out Time
7 seconds color and black and white from tray 1
Optional Accesories
Tree Tray Module / High Capacity
Tray Module (one required)
100 Sheet Finisher
Mobility Plate
Foreign Interface
DocBuilder Pro
EFI ED 100 Denitometer / X-Rite DTP32
Customer Replaceable Units
4 Toners: cyan, magenta, yellow, black
4 Drum Cartridges: CMYK
Waste Toner container
Fuser Module
Staples refill for finisher option
Electrical Requirements
15 amp (115v), 10 Amp (220/240v)
Dimensions (W x D x H)
26.0 x 30.7 x 45.1" (660 x 780 x 1145mm)
 
Back to top